Results 1 to 10 of 10

Thread: Used JRSC question...chattering

  1. #1
    Inactive Member vudu's Avatar
    Join Date
    April 29th, 2003
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I have a JRSC on a 97 Civic EX. The SC doesn't touch the firewall. It's more of a intermittent chatter. It sounds like scraping and churning, but goes away after 1.2k I suspect worn gears, but I'm not sure. Ive heard similar sounds from a different car with a JRSC, but mine is noticably louder. Does anybody know the warranty time after having a SC rebuilt by Magnuson? I bought the kit used so I have no warranty to begin with, but would like to know if I get one afterwords...

    Thanks,
    Jim

  2. #2
    Inactive Member grand600intercooled's Avatar
    Join Date
    January 3rd, 2003
    Posts
    200
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I would call magnusson and find out!!!!

  3. #3
    Inactive Member Jay Lee's Avatar
    Join Date
    January 27th, 2000
    Posts
    128
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    My SC on my GSR has had that sound for the entire 57,000+ miles it's been on with the last third of it's life at 10psi, and I bought mine used as well. The only problem I've seen is that the nuts on the short crossbar of the upper tensioner mount bracket (right next to the alternator) came loose and the bracket began vibrating and ringing --replaced those and it's been easy street since then...

  4. #4
    Inactive Member BXSI's Avatar
    Join Date
    December 14th, 2002
    Posts
    122
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    mine chatters a tiny bit too and this was from day one. i bought my kit new btw. about 15k on it now and no problems.

  5. #5
    Inactive Member vudu's Avatar
    Join Date
    April 29th, 2003
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I bought a used JRSC and did the install a few days ago. It's up and running, but the SC chatters loudly at idle. The noise goes away above 1.2k. Should I be concerned about this? When I had the blower off, I was able to rotate the pulley left and right a bit before it engaged.

    I was going to get it rebuilt in a month or so, has anyone gotten their SC rebuilt by Superchargersonline.com? They offer an S-Port for $300 (is that the similar to the Endyne Mod?)

    Thanks,
    Jim

  6. #6
    Inactive Member grand600intercooled's Avatar
    Join Date
    January 3rd, 2003
    Posts
    200
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I would recommend magnusson do the rebuild. as far as the play in the charger goes. in the nose drive of the unit there are 2 pieces with 3 pins that go into a drive coupler. there is a chance the coupler is worn and causing the chatter. If it is really loud I would get it fixed asap. Mine is absolutely silent at idle

  7. #7
    Senior Hostboard Member CROM's Avatar
    Join Date
    July 17th, 1999
    Posts
    1,202
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Could this chatter be the relay vibarting against the firewall?

    I get a chatter at idle, but it isnt the blower, but a vibration due to the blower movement.

  8. #8
    Inactive Member GSRDPM's Avatar
    Join Date
    February 25th, 2002
    Posts
    269
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I bought mine new in 1999 and it made similar noises from day 1. Today, some 50K miles later, it still does.

  9. #9
    Senior Hostboard Member CROM's Avatar
    Join Date
    July 17th, 1999
    Posts
    1,202
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Of course the blower doesnt hit the firewall, I said the relay box.

    My blower makes all kinds of noises, always has. Iv'e had it on for 65k miles.

  10. #10
    Inactive Member vudu's Avatar
    Join Date
    April 29th, 2003
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    I uninstalled the blower yesterday, and I inspected the rotors. They look OK, some scratches mostly on the inlet side. Magnuson also told me to inspect the oil through the inspection plug. I did, and I had to stick a piece of paper pretty far down to get oil. Isn't it supposed to be filled up to the top of the plug? I've heard that it takes forever to get stuff back from Magnuson. Does anyone have any experience with superchargersonline.com? (pse.us)?

    -jim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •